All circuits where BSB attend and an Official TSL Timing Sector map exists have been mapped to i2M format.
Jump straight to Instructions

Brands GP as example below;
# i2M Map
BrandsGP;
5121.6191,N;0015.6192,E;025; // Start / Finish Line
5121.5605,N;0015.5730,E;208; // Sector #1
5121.3770,N;0015.9603,E;335; // Sector #2
59:59.000;59:59.000;0;
59:59.000;59:59.000;
59:59.000;59:59.000;
59:59.000;59:59.000;
5121.3193,N;0015.7500,E;080; // Sector #3
59:59.000;59:59.000;

List of circuits included:

• Almeria – Sectors included
• Anglesey – Sectors included
• Andalucia – 1st sector only (As there are 3 layouts)
• Aragon – Sectors included
• BrandIND – Sectors included
• BrandsGP – BSB Sectors included – Ref : https://www.msvracing.com/media/9063/brands-hatch-gp-bsb.pdf
• Cadwell – BSB Sectors included – Ref : https://www.msvracing.com/media/9065/cadwell-park-bsb.pdf
• Cartagen – Sectors included
• Combe – Sectors included
• DoninGP – BSB Sectors included – Ref : https://www.msvracing.com/media/9066/donington-park-gp-bsb-pit-entry-at-pit-white-line.pdf
• DoninNAT – BSB Sectors included – Ref : https://www.msvracing.com/media/9059/donington-park-national-3-int-bsb.pdf
• Jerez – WSBK Sectors included
• Knockhil – BSB Sectors included – Ref : https://www.msvracing.com/media/9062/knockhill-bsb.pdf
• Navarra – Sectors included
• Pembrey – Sectors included
• Portimao – WSBK Sectors included
• SilveNAT – BSB Sectors included – Ref : https://www.msvracing.com/media/9060/silverstone-national-3-int-bsb.pdf
• Snett300 – BSB Sectors included – Ref : https://www.msvracing.com/media/9058/snetterton-300-bsb.pdf
• Oulton – BSB Sectors included – Ref : https://www.msvracing.com/media/9061/oulton-park-international-3-intermediate-bsb.pdf
• Thruxton – BSB Sectors included – Ref : https://www.msvracing.com/media/10781/thruxton-bsb.pdf
• FREE1 – Empty so you can auto map a circuit not listed

Instructions

*Updated 06-April-2023 – Pembrey National TSL sectors added
*Updated 23-September-2023 – Aragon & Navarra maps + sectors added
**Updated 01-Novemeber-2024 – Andalucia map + sector added

** Note : This will replace all your existing circuits and laptimes. So make sure you back them up first.

1. Download circuitiInOut file above
2. Copy to a fresh USB stick
   1. Ensure the USB Stick is less than 8GB and formatted as either ExFAT or FAT32
3. Insert the USB stick into the USB port of the i2M Dash
4. With the Dash powered on; navigate to
   Chromometer -> Export & Import -> Import Circuits from USB
5. Once imported, go to Chromometer -> Select Circuit

The Select Circuit Page should look like the below images.